User's Manual

24D-Link DIR-605L User Manual
Section 3 - Conguration
1. To enable wireless security on the router, use the drop-down
menu to select the desired option. To enable WEP, select
Enable WEP Wireless Security (basic).
2. Next to Authentication, select either Open or Shared Key.
Shared Key provides greater security.
3. Select either 64-bit or 128-bit encryption from the drop-down
menu next to WEP Key Length.
4. Next to Default WEP Key, select WEP Key 1 and enter a WEP
key next to WEP Password. Make sure you enter this key
exactly on all your wireless devices. You may enter up to four
dierent keys either using Hex or ASCII. Hex is recommended
(letters A-F and numbers 0-9 are valid). In ASCII all numbers and
letters are valid.
5. Click Save Settings to save your settings. If you are conguring
the router with a wireless adapter, you will lose connectivity
until you enable WEP on your adapter and enter the same
WEP key as you did on the router.
NOTE:
It is recommended to enable encryption on your wireless router
before connecting your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal
may degrade when enabling encryption due to the added overhead.
Wireless Security