User's Manual

20D-Link DIR-605L User Manual
Section 3 - Conguration
Select Dynamic (most common) or Static. Select Static if
your ISP assigned you the IP address, subnet mask, gateway,
and DNS server addresses.
Enter the IP address (Static L2TP only).
Enter the primary and secondary DNS server addresses
(Static L2TP only).
Enter the gateway IP address provided by your ISP.
The DNS server information will be supplied by your ISP
(Internet Service Provider.)
The default MAC address is set to the WAN’s physical
interface MAC address on the broadband router. It is not
recommended that you change the default MAC address
unless required by your ISP.
You can use the Copy Your PC’s MAC Address button to
copy the MAC address of the Ethernet card installed by your
ISP and replace the WAN MAC address with the MAC address
of the router. It is not recommended that you change the
default MAC address unless required by your ISP.
Enter the server IP address provided by your ISP (optional).
L2TP:
L2TP IP Address:
L2TP Subnet
Mask:
L2TP Gateway
Address:
Primary DNS
Server:
MAC Address:
L2TP Server IP
Address:
Internet Setup
L2TP
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and
password. This option is typically used for DSL services.