User's Manual

14D-Link DIR-605L User Manual
Section 3 - Conguration
Enter the IP address assigned by your ISP.
Enter the subnet mask assigned by your ISP.
Enter the gateway assigned by your ISP.
The default MAC address is set to the WAN’s physical
interface MAC address on the broadband router. It is not
recommended that you change the default MAC address
unless required by your ISP.
You can use the Copy Your PC’s MAC Address button to
copy the MAC address of the Ethernet card installed by your
ISP and replace the WAN MAC address with the MAC address
of the router. It is not recommended that you change the
default MAC address unless required by your ISP.
Enter the primary DNS server IP address assigned by your ISP.
Enter an optional secondary DNS address.
Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your specic ISP. 1500
is the default MTU.
IP Address:
Subnet Mask:
Default Gateway:
MAC Address:
Primary DNS
Server:
Secondary DNS
Server:
MTU:
Internet Connection
Static IP (assigned by ISP)
Select Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet
mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the elds must be in the
appropriate IP form, which are four octets separated by a dot (x.x.x.x). The router will not accept the IP address if it is not in this
format. Click Save Settings to apply them.