User's Manual
Table Of Contents
- Preface
- Product Overview
- Installation
- Configuration
- Web-based Configuration Utility
- Internet Connection Setup Wizard (3G Mode)
- Wireless Settings
- Network Settings
- Virtual Server
- Port Forwarding
- Application Rules
- Network Filters
- Website Filters
- Firewall Settings
- Advanced Wireless Settings
- Advanced Network Settings
- Administrator Settings
- Time Settings
- System Settings
- Update Firmware
- DDNS
- System Check
- Schedules
- Device Information
- Logs
- Statistics
- Internet Sessions
- Wireless
- Support
- Web-based Configuration Utility
- Wireless Security
- Connect to a Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
63D-Link DIR-604 User Manual
Section 3 - Configuration
To use the Universal Plug and Play (UPnP
™
)
feature, tick the Enable UPNP box. UPNP
provides compatibility with networking
equipment, software, and peripherals.
De-selecting this check box will not allow the
DIR-604 to respond to pings. Blocking the Ping
may provide some extra security from hackers.
Tick the check box to allow the Internet port
to be “pinged”.
You may set the port speed of the Internet
port to 10Mbps, 100Mbps, or 10/100Mbps
Auto. Some older cable or DSL modems may
require you to set the port speed to 10Mbps.
Tick the Enable Multicast Streams check
box to allow multicast trafc to pass through
the Router from the Internet.
Tick the Wireless Enhance Mode check box
to enable the Router to forward all multicast
streams from the Internet to the wireless
station using a unicast stream. This feature
helps improve the quality of multimedia
applications for wireless users.
Enable UPnP:
Enable WAN
Ping Respond:
WAN
Port Speed:
Enable
Multicast
Streams:
Wireless
Enhance
Mode:
Advanced Network Settings