User's Manual

45D-Link DIR-604 User Manual
Section 3 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with
a username and password. This option is typically used for DSL services.
Manual Internet Configuration (PPTP)
Select PPTP (Username/Password) to obtain IP Address
information automatically from your ISP.
Select Static IP if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses. In most
cases, users will select Dynamic IP (DHCP).
Enter the IP address (Static PPTP only).
Enter the subnet mask (Static PPTP only).
Enter the gateway IP address provided by your ISP.
Enter the primary DNS server address (Static PPTP only).
The default MAC address is set to the Internet port’s physical
interface MAC address on the broadband Router. It is not
recommended that you change the default MAC address
unless required by your ISP. You can use the Copy Your
PC’s MAC Address button to replace the Internet port’s MAC
address with the MAC address of your Ethernet card.
Enter the server IP address provided by your ISP (optional).
Enter your PPTP user name.
My Internet
Connection is:
Address Mode:
PPTP IP
Address:
PPTP Subnet
Mask:
PPTP Gateway
IP Address:
Primary DNS
Server:
MAC Address:
PPTP Server IP
Address:
User Name: