User's Manual
Table Of Contents
- Preface
- Product Overview
- Installation
- Configuration
- Web-based Configuration Utility
- Internet Connection Setup Wizard (3G Mode)
- Wireless Settings
- Network Settings
- Virtual Server
- Port Forwarding
- Application Rules
- Network Filters
- Website Filters
- Firewall Settings
- Advanced Wireless Settings
- Advanced Network Settings
- Administrator Settings
- Time Settings
- System Settings
- Update Firmware
- DDNS
- System Check
- Schedules
- Device Information
- Logs
- Statistics
- Internet Sessions
- Wireless
- Support
- Web-based Configuration Utility
- Wireless Security
- Connect to a Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
44D-Link DIR-604 User Manual
Section 3 - Configuration
Click the Save Settings button when you have nished conguring the Internet connection.
Secondary DNS
Server:
Maximum Idle
Time:
MTU:
Connection
Mode Select:
I need sniper:
Special Dial
Mode:
Enter the secondary DNS server address (Static PPPoE only).
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, select
either Always or Manual for the Connection mode select setting below.
Maximum Transmission Unit. You may need to change the MTU for optimal performance with your specic ISP. The default
is 1492.
Select either Always, Manual, or Connection On-Demand. Click the Add New button to create a new connection.
Tick the check box to indicate you want to use the sniper feature.
Select normal dial mode (default) or special dial mode 1, special mode 2, special mode 3, special mode 4, special
mode 5, or special mode 6.