User's Manual
Table Of Contents
- Preface
- Product Overview
- Installation
- Configuration
- Web-based Configuration Utility
- Internet Connection Setup Wizard (3G Mode)
- Wireless Settings
- Network Settings
- Virtual Server
- Port Forwarding
- Application Rules
- Network Filters
- Website Filters
- Firewall Settings
- Advanced Wireless Settings
- Advanced Network Settings
- Administrator Settings
- Time Settings
- System Settings
- Update Firmware
- DDNS
- System Check
- Schedules
- Device Information
- Logs
- Statistics
- Internet Sessions
- Wireless
- Support
- Web-based Configuration Utility
- Wireless Security
- Connect to a Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
40D-Link DIR-604 User Manual
Section 3 - Configuration
If you selected PPTP, enter your PPTP username and
password. Click Next to continue.
If you selected PPPoE, enter your PPPoE username and
password. Click Next to continue.
Select “Static IP” if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses.
Note: Make sure to remove your PPPoE software from your
computer. The software is no longer needed and will not work
through a router.