User's Manual
Table Of Contents
- Preface
- Product Overview
- Installation
- Configuration
- Web-based Configuration Utility
- Internet Connection Setup Wizard (3G Mode)
- Wireless Settings
- Network Settings
- Virtual Server
- Port Forwarding
- Application Rules
- Network Filters
- Website Filters
- Firewall Settings
- Advanced Wireless Settings
- Advanced Network Settings
- Administrator Settings
- Time Settings
- System Settings
- Update Firmware
- DDNS
- System Check
- Schedules
- Device Information
- Logs
- Statistics
- Internet Sessions
- Wireless
- Support
- Web-based Configuration Utility
- Wireless Security
- Connect to a Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
28D-Link DIR-604 User Manual
Section 3 - Configuration
Device Information
This page displays the current information for the DIR-604. It will display the LAN and Wireless information, in addition
to the rmware version and date the rmware was last updated.
If your Internet connection is set up for a Dynamic IP
address then a DHCP Release button and a DHCP
Renew button will be displayed. Use DHCP Release
to disconnect from your ISP and use DHCP Renew
to connect to your ISP.
If your Internet connection is set up for PPPoE,
PPTP, or L2TP, a Connect button and a Disconnect
button will be displayed. Use Disconnect to drop the
Internet connection and use Connect to establish
the Internet connection.See the following for more
information.
LAN:
Wireless
802.11n:
Displays the MAC address and the private
(local) IP settings for the Router.
Displays the wireless mode, MAC address and
your wireless settings such as SSID, Channel,
and Encryption status.