User's Manual

19D-Link DIR-604 User Manual
Section 3 - Configuration
LAN Setup
This section will allow you to change the internal network settings of the Router and to congure the DHCP settings.
Enter the IP address of the Router. The default
IP address is 192.168.0.1.
If you change the IP address, once you click
Save Settings, you will need to enter the new
IP address in your browser to get back into the
conguration utility.
Enter the subnet mask. The default subnet mask
is 255.255.255.0.
Enter the default gateway IP address.
Enter the primary DNS server IP address.
Enter the secondary DNS server IP address.
Tick this check box to enable the DHCP server
on your Router. De-select to disable this function.
Enter the starting and ending IP addresses for
the DHCP server’s IP assignment.
Note: If you statically (manually) assign IP
addresses to your computers or devices, make
sure the IP addresses are outside of this range
or you may have an IP conict.
Router
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS Server:
Secondary DNS
Server:
Enable
DHCP Server:
DHCP IP Address
Range:
DHCP Lease Time:
The length of time for the IP address lease. Enter the Lease time in minutes.
Enable IP/
MAC Binding: Tick to enable IP/MAC binding.