User's Manual
Table Of Contents
- Preface
- Product Overview
- Installation
- Configuration
- Web-based Configuration Utility
- Internet Connection Setup Wizard (3G Mode)
- Wireless Settings
- Network Settings
- Virtual Server
- Port Forwarding
- Application Rules
- Network Filters
- Website Filters
- Firewall Settings
- Advanced Wireless Settings
- Advanced Network Settings
- Administrator Settings
- Time Settings
- System Settings
- Update Firmware
- DDNS
- System Check
- Schedules
- Device Information
- Logs
- Statistics
- Internet Sessions
- Wireless
- Support
- Web-based Configuration Utility
- Wireless Security
- Connect to a Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
8D-Link DIR-604 User Manual
Section 2 - Installation
Connection - AP Mode
To use the DIR-604 in AP Mode, follow the steps
below:
1. Ensure you have a broadband Internet connector,
such as a cable or DSL client line that connects
the Internet to your home or ofce.
2. Connect the cable properly or install the modem.
3. Connect the cable or modem with the broadband
router.
4. Connect the DIR-604’s Ethernet port to your
LAN.
5. Move the switch to wireless AP Mode.
6. Connect your PC or notebook to the DIR-604
using the PC or notebook’s wireless adapter.