User's Manual

Section 3 – Configuration
————————————————————————————————————————————————————————————
D-Link DIR-524 User Manual 38
System
The System Tools section allows you to reboot the device, or restore the router to the factory default settings. Restoring
the unit to the factory default settings will erase all settings, including any rules that you have created.
Save to Local
Hard Drive:
Use this option to save the current router
configuration settings to a file on the hard disk
of the computer you are using. First, click the
Save configuration button. You will then see
a file dialog, where you can select a location
and file name for the settings.
Load from
Local Hard
Drive:
Use this option to load previously saved
router configuration settings. First, use the
Browse to find a previously save file of
configuration settings. Then, click the
Restore Configuretion from File button to
transfer those settings to the router.
Restore to
Factory
Default s:
This option will restore all configuration
settings back to the settings that were in
effect at the time the router was shipped from
the factory. Any settings that have not been
saved will be lost, including any rules that you
have created. If you want to save the current
router configuration settings, use the Save
configuration button above.
Reboot the
Device:
Click to reboot the router.