User's Manual

Section 3 – Configuration
————————————————————————————————————————————————————————————
D-Link DIR-524 User Manual 36
tools
Administrator Settings
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.
There are two accounts that can access the management interface through the web browser.
User Accounts:
Enter a name for the Administrator Login Name.
The administrator can make changes to the
settings.
Password/
Confirm
Password:
Enter the new password for the
Administrator.Then enter the password again to
confirm it.
Enable Remote
Management:
Remote management allows the DIR-524 to be
configured from the Internet by a web browser.
A username and password is still required to
access the Web-Management interface. In
general, only a member of your network can
browse the built-in web pages to perform
Administrator tasks. This feature enables you to
perform Administrator tasks from the remote
(Internet) host.
IP Address
range:
you can specify the IP address of the computer
on the Internet that you want to have access to
your router, or You can enable Any Remote IP
to allow access to any computer on the Internet.
Port: The port number used to access the DIR-524.Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of
the DIR-524 and 8080 is the port used for the Web Management interface.