User Manual

Section 3 – Configuration

Application Rules

Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and

others. These applications have difficulties working through NAT (Network Address Translation). Special Applications

makes some of these applications work with the DIR-524. If you need to run applications that require multiple

connections, specify the port normally associated with an application in the Incoming Ports , select the protocol type as

TCP or UDP, then enter the Outgoing ports associated with the Incoming ports to open them for inbound traffic.



Name:

Enter a name for the rule .

Incoming Port

Start/ Incoming

Port End:

Enter the port or a range of ports that you

want to use application rules .

Traffic Type: Select TCP, UDP, or BOTH from the

drop-down menu.



Outgoing Port

Start/ outgoing

Port End:

Enter the port or a range of ports that you

want to access application rules on the

WAN.

Application

Rules List :

The List show the rules you configured.



————————————————————————————————————————————————————————————

D-Link DIR-524 User Manual