User Manual

Section 3 – Configuration

Network Settings

This section will allow you to change the local network settings of the router and to configure the DHCP settings.

IP Address:

Enter the IP address of the router. The default IP

address is 192.168.0.1.

Subnet Mask:

Enter the Subnet Mask of the router.

DHCP SERVER SETTINGS:

Enable DHCP

Server:

Select Enabled to enable the DHCP server on

your router. Select Disabled to disable this

function.

DHCP Start IP

Address :

Enter the starting and ending IP addresses for the

DHCP server’s IP assignment.

Maximum DHCP

Users:

Limiting number of DHCP users.

DHCP Lease Time :

The length of time for the IP address lease. Enter

the Lease time in minutes.

Add DHCP Reservation :

Enable:

Check the box to enable this function.

IP Address:

Enter the IP address you want to assign to the

computer or device. This IP Address must be

within the DHCP IP Address Range.

MAC Address:

Enter the MAC address of the computer or

device.And click the Copy Your PC’s MAC

Address button to to replace the Internet port’s

MAC address with the MAC address of your

Ethernet card.

DHCP

Reservations List :

The List show the clients of the DHCP

Reservation.

DHCP Clients List :

The List show the clients that had thedynamic IP

Address .

————————————————————————————————————————————————————————————

D-Link DIR-524 User Manual