User Manual

Section 3 – Configuration

Wireless Basic Settings

Use this section to configure the wireless settings for your D-Link Router. Please note that changes made on this

section may also need to be duplicated on your Wireless Client.

Enable Wireless:

Select Enabled to enable the wireless

function. If you do not want to use wireless,

select Disabled.

Wireless Network

Name:

6ervice Set Identifier (SSID) is the name of

your wireless network. Create a name

using up to 32 characters. The SSID is

case-sensitive.

Channel:

Indicates the channel setting for the

DIR-524. The Channel can be changed to

fit the channel setting for an existing

wireless network or to customize the

wireless network.

SSID Broadcast:

When select on, your wireless network

name is broadcast to anyone within the

range of your signal. If you're not using

encryption then they could connect to your

network. When select off, SSID will hide,

you must enter the SSID on the client

manually to connect to the network.

AP Isolation :

Selecting On enables AP isolation mode.

When enabled, STAs associated to the AP

will not be able to communicate with each

other.

————————————————————————————————————————————————————————————

D-Link DIR-524 User Manual