User's Manual
19D-Link DIR-516 User Manual
Section 2 - Setting Up With a Web Browser - Router Mode
• Wireless Settings
Wireless
Use this to disable NAT on the router and turn it into an
Access Point.
Enable SSID broadcast if you want the router to transmit its
SSID publicly so other wireless devices can discover it.
Enter the SSID name you want to use for your wireless
network.
Use the dropdown menu to specify the wireless mode.
Use the dropdown menu to select the wireless channel.
Use the dropdown menu to select the channel bandwidth.
If you selected the 802.11ac, 802.11n, 802.11 b/g, or 802.11
b/g/n wireless modes, the available options are 20 MHz and
20/40 MHz. 20/40/80MHz(Auto) For the others, 20 MHz is
the only option.
Select a wireless security encryption option. You can also
choose to not use one by selecting None, but this is not
recommended.
Enabled Access
Point Mode:
Enable Wireless:
Name (SSID):
Mode:
Channel:
Band Width:
Security
Options:
T
his page allows you to congure the wireless LAN settings. You can also congure the wireless encryption and wireless network
parameters.