User Manual Part 1

12D-Link DIR-508L User Manual
Section 2 - Installation
Setting Up Your DIR-508L
3. Use the following information to connect to your DIR-508L
wirelessly:
Default Wi-Fi SSID: DIR-508L
Default Password: [leave this blank]
1. Peel back the protective lm from the top and bottom of the
device.
2. Charge the device by connecting one end of the USB AC
adapter to the DIR-508L and the other end to a wall outlet.
Charge the device for at least 4 hours or until the battery LED
indicator is solid green or o.
Mobile
Desktop
4. Open your web browser, and type http://dlinkrouter.local in
the address bar to begin the Setup Wizard.
Insert diagram of unit
connected to AC adapter
and wall outlet