User's Manual

63D-Link DIR-412 User Manual
Section 3 - Configuration
Use this option to save the current router conguration
settings to a le on the hard disk of the computer you
are using. First, click the Save button. You will then
see a le dialog, where you can select a location and
le name for the settings.
Use this option to load previously saved router
conguration settings. First, use the Browse control
to nd a previously save le of conguration settings.
Then, click the Load button to transfer those settings
to the router.
Click the Restore button to restore all conguration
settings back to the settings that were in effect at the
time the router was shipped from the factory. Any
settings that have not been saved will be lost, including
any rules that you have created. If you want to save
the current router conguration settings, use the Save
button above.
Click to reboot the router.
Click the Clear button to restore the device back to the
English interface version and remove other languages
installed for the system web pages.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to Factory
Default Settings:
Reboot the
Device:
Clear Language
Pack:
System Settings