User's Manual

61D-Link DIR-412 User Manual
Section 3 - Configuration
Time Settings
Select the Time Zone from the drop-down menu.
Check the box to enable Daylight Saving time.
Click this button to set the device’s time the same
to local PC.
Check the box to enable the device to automatically
synchronize with a D-Link NTP Server. NTP stands
for Network Time Protocol. NTP synchronizes
computer clock times in a network of computers.
This will only connect to a server on the Internet,
not a local server.
Select one of the D-Link NTP Servers from the
drop-down menu. The DIR-412 will then synchronize
it’s clock to be the same time as the D-Link Internet
time server. Click the Update Now button to
synchronize with the D-Link Internet time server
immediatley.
To manually input the time, use the drop-down
menus to enter the values in these elds for the
Year, Month, Day, Hour, Minute, and Second.
Time Zone:
Enable Daylight
Saving:
Sync your
Computer’s Time
Settings:
Autromatic
Time and Date
Configuration:
NTP Server Used:
Set the Time and
Date Manually:
The Time Conguration option allows you to congure, update, and maintain the correct time on the internal system
clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also
be congured to automatically adjust the time when needed.
Click the Save Settings button to save any changes made.