User's Manual

55D-Link DIR-412 User Manual
Section 3 - Configuration
Firewall Rules
Enter a name for the rewall rule.
Use the drop-down menu to specify if the router
should Allow or Deny traffic matching the
rewall rule.
Use the drop-down menus to select the Source
and Destination interfaces for the Firewall Rule
Use the IP Address fields next to each
Interface drop-down menu to specify the IP
address ranges for the Source/Destination
interfaces.
The rst host in the IP address range should
be entered in the top eld and the last host in
the IP address range should be entered in the
eld beneath for boththe Source/Destination
intefaces.
Use the drop-down menu to select the protocol
that will be used for the rewall rule (TCP, UDP,
ICMP, or ALL).
Name:
Action:
Interface:
Protocol:
To create a rewall rule, congure the parameters as described below: