User's Manual

52D-Link DIR-412 User Manual
Section 3 - Configuration
Network Filters
Select Turn MAC Filtering Off, allow MAC addresses
listed below, or deny MAC addresses listed below
from the drop-down menu.
Enter the MAC address you would like to lter.
To nd the MAC address on a computer, please refer
to the Networking Basics section in this manual.
Select a DHCP client from the drop-down menu and
click << to copy the MAC Address from the DHCP
client.
Select a schedule for when the Network Filter will be
enabled.The user can click the New Schedule button
to bring up the “Schedule Webpage” to congure a
new schedule.
Configure MAC
Filtering:
MAC Address:
DHCP Client:
Schedule:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses
from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of
clients that are currently connected to the Broadband Router.