User's Manual
Table Of Contents
- Preface
- Product Overview
- Installation
- Configuration
- Web-based Configuration Utility
- Internet Connection Setup Wizard (3G Mode)
- Manual Configuration (3G Mode)
- Internet Connection Setup Wizard (WAN Mode)
- Manual Configuration (WAN Mode)
- Wireless Settings
- Network Settings
- Virtual Server
- Port Forwarding
- Application Rules
- QoS Engine
- Network Filters
- Website Filters
- Firewall Settings
- Advanced Wireless Settings
- Wi-Fi Protected Setup
- Advanced Network Settings
- Administrator Settings
- Time Settings
- E-mail Settings
- System Settings
- Update Firmware
- DDNS
- System Check
- Schedules
- Device Information
- Logs
- Statistics
- Internet Sessions
- Wireless
- Support
- Web-based Configuration Utility
- Wireless Security
- Connect to a Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
23D-Link DIR-412 User Manual
Section 3 - Configuration
Select the type of Internet connection you will use
on your WAN connection. Check the Skip 3G
Conguaration box if you do not want to congure
the router’s 3G connection.
Click Next to continue.
If you selected Dynamic IP Address, you may need
to enter the MAC address of the computer that was
last connected directly to your modem. If you are
currently using that computer, click Copy Your PC’s
MAC Address and then click Next to continue.
The Host Name is optional but may be required by
some ISPs. The default host name is “DIR-412”.