User Manual Part 3

53D-Link DIR-400 User Manual
Section 3 - Conguration
Tick this checkbox to enable or disable xed routes
to dened destinations.
Use the drop-down menu to choose which interface,
WAN or WAN (Physical Port), the IP packet must
use to transit out of the router.
The IP address of the packets that will take this
route.
The subnet of the IP address of the packets that
will take this route.
Species the next hop to be taken if this route is
used.
Enable:
Interface:
Destination:
Subnet Mask:
Gateway:
Routing
This option allows you to dene xed routes to dened destinations.