- D-link DCS-900 Internet Camera ManualVersion 1.10
Table Of Contents
- Table of Contents
- Package Contents
- System Requirements
- Introduction
- Features and Benefits
- Connections
- LEDs
- Hardware Installation
- Security
- Using the Setup Wizard
- DCS-900 Configuration
- IPView Lite Application Installation
- IPView Lite - Getting Started
- Uninstall IPView Application
- Appendix A: Frequently Asked Questions
- Troubleshooting
- Appendix B: How to PING your IP address
- Time Zone Table
- Xplug Control Installation
- Adjusting the Camera Focus
- Technical Specifications
- Contacting Technical Support
- Warranty and Registration
56
Tools
Reset the camera and update firmware in this section. Please refer to the DCS-900
Configuration section under Tools-Default for further details.
IPView Lite- Getting Started (continued)
Camera Property Settings > Tools
Upgrade Firmware
Enter the full path of the firmware binary file name in the Update Firmware field or you
can click on the Browse button to select the file. Once the firmware file is entered click
on the Update button to proceed with the update process. Once completed, click OK.
Warning
The download firmware procedure cannot be interrupted. If the
network connection is broken during the download procedure it
could cause serious damage to the Internet Camera.