- D-link DCS-900 Internet Camera ManualVersion 1.10
Table Of Contents
- Table of Contents
- Package Contents
- System Requirements
- Introduction
- Features and Benefits
- Connections
- LEDs
- Hardware Installation
- Security
- Using the Setup Wizard
- DCS-900 Configuration
- IPView Lite Application Installation
- IPView Lite - Getting Started
- Uninstall IPView Application
- Appendix A: Frequently Asked Questions
- Troubleshooting
- Appendix B: How to PING your IP address
- Time Zone Table
- Xplug Control Installation
- Adjusting the Camera Focus
- Technical Specifications
- Contacting Technical Support
- Warranty and Registration
28
Light Frequency:
Adjust the light frequency to suit your area of operation. 50 Hz and 60 Hz variants are
available to accommodate the different light frequencies found in USA (60 Hz) and Europe
(50 Hz) for optimal image quality.
Apply/Cancel:
After making sure all your settings are correct, click on Apply to store the settings. You
can alternatively click on Cancel to restore all settings to the values last saved to or
retrieved from the DCS-900.
Tools > Admin
The Tools->Admin menu allows the system administrator to assign users permission
to monitor the DCS-900 from a remote site.
Click on Tools, then Admin in the left hand panel to access the Admin menu.
DCS-900 Configuration (continued)
Advanced > Video
The default setting
for Admin ID is
blank (Null String).
You need to key in
the Admin ID with a
maximum length of
12 (Printable ASCII)
characters.
Enter the Admin
Password with a
maximum length of 8
(Printable ASCII)
characters.
To confirm the Admin
Password, type in your
password again.