- D-link DCS-900 Internet Camera ManualVersion 1.10
Table Of Contents
- Table of Contents
- Package Contents
- System Requirements
- Introduction
- Features and Benefits
- Connections
- LEDs
- Hardware Installation
- Security
- Using the Setup Wizard
- DCS-900 Configuration
- IPView Lite Application Installation
- IPView Lite - Getting Started
- Uninstall IPView Application
- Appendix A: Frequently Asked Questions
- Troubleshooting
- Appendix B: How to PING your IP address
- Time Zone Table
- Xplug Control Installation
- Adjusting the Camera Focus
- Technical Specifications
- Contacting Technical Support
- Warranty and Registration
24
ROUTER SET-UP AND INSTALLATION
The following steps generally apply to any router that you have on your network. The
D-Link DI-614+ is used as an example to clarify the configuration process.
Determine Your Router’s WAN IP Address
Your WAN IP
Address
information
will be listed
here.
Note: Because a dynamic WAN IP can change from time to time depending
on your ISP, you may want to obtain a Static IP address from your ISP. A
Static IP address is a fixed IP address that will not change over time and will
be more convenient for you to use to access your camera from a remote
location.
Installing the DCS-900 Behind a Router
DCS-900 Configuration (continued)