- D-link DCS-900 Internet Camera ManualVersion 1.10
Table Of Contents
- Table of Contents
- Package Contents
- System Requirements
- Introduction
- Features and Benefits
- Connections
- LEDs
- Hardware Installation
- Security
- Using the Setup Wizard
- DCS-900 Configuration
- IPView Lite Application Installation
- IPView Lite - Getting Started
- Uninstall IPView Application
- Appendix A: Frequently Asked Questions
- Troubleshooting
- Appendix B: How to PING your IP address
- Time Zone Table
- Xplug Control Installation
- Adjusting the Camera Focus
- Technical Specifications
- Contacting Technical Support
- Warranty and Registration
13
Using the Setup Wizard (continued)
You must change the Admin ID and
Password immediately to protect
your camera against unauthorized
access. By default, the Admin ID and
Password are blank. To change the
Admin ID and Password, select both
Change boxes and enter a New ID
and New Password.
The IP Address, Subnet Mask of
your camera and Gateway must
correspond with your network settings
for you to access the camera. If you
are unsure of what these settings
should be, please check with your
network administrator.
If you need to make any changes,
click Back to modify your camera
settings. Otherwise, click Restart to
save and apply your settings.
Click Restart
Click Next
Click Next
Click Link
Your setup is now complete! Click
Link to automatically launch your
web browser and view your images.