- D-link DCS-900 Internet Camera ManualVersion 1.10
Table Of Contents
- Table of Contents
- Package Contents
- System Requirements
- Introduction
- Features and Benefits
- Connections
- LEDs
- Hardware Installation
- Security
- Using the Setup Wizard
- DCS-900 Configuration
- IPView Lite Application Installation
- IPView Lite - Getting Started
- Uninstall IPView Application
- Appendix A: Frequently Asked Questions
- Troubleshooting
- Appendix B: How to PING your IP address
- Time Zone Table
- Xplug Control Installation
- Adjusting the Camera Focus
- Technical Specifications
- Contacting Technical Support
- Warranty and Registration
10
Security
To ensure the highest security and prevent unauthorized usage of the DCS-900, the
Administrator has the exclusive privilege to authorize all users. The DCS-900 supports
multi-level password protection/access to the DCS-900 that can be restricted by the
Administrator for defined users who have a User Name and User Password.
The Administrator can release a public User Name and Password so that when remote
users access the DCS-900 they will be allowed to view the images transmitted by the
DCS-900.
Note:
When the DCS-900 is used for the first time, it is highly recommended that the Administrator
set the Admin ID and Admin Password to constrain user access to the DCS-900 since
the Default settings are Null String (no password). Once the ID and Password are defined,
only the Administrator has access to the management of the DCS-900. This procedure
should be done as soon as possible since the security features of the DCS-900 will not
be enabled until the Admin ID and Admin Password is defined.