User's Manual
Table Of Contents
- Preface
- Product Overview
- Installation
- Configuration (Router Mode)
- Web-based Configuration Utility
- Setup
- IPv6
- IPv6 Manual Setup
- PLC Settings (Router Mode)
- Advanced
- Guest Zone
- IPv6 Firewall
- IPv6 Routing
- Tools
- Status
- Wireless Connection Setup Wizard
- Wireless Security Setup Wizard
- Add Wireless Device with WPS Wizard
- Configuration (AP Mode)
- Web-based Configuration Utility
- Wireless Setup Wizard
- Configuration
- Status
- Wireless Security
- Connect to a Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
- Technical Specifications
- Contacting Technical Support
- Warranty
- Registration
60D-Link DHP-1565 User Manual
Section 3 - Conguration
Member List:
Link Rate:
This section provides information on the PowerLine
AV devices in your PowerLine network, or any devices
that were previously connected but it are currently
disconnected.
Displays the device’s current data rate in Mbps.
Status:
Qos Settings:
Mac Address:
This field shows the status of the device. If the field
displays the word Connect, then the device is connected
to your PowerLine network. If the eld displays the word
Disconnect, then the device has been added to the network
but it is not ready. Please check its password and make sure
the device is powered on.
You can configure your PowerLine AV devices to give
priority to powerline network trac accordingly. Enter the
name, MAC Address, and priority level.
You can nd the MAC address printed on the back of your
device.