User's Manual

7D-Link DHM-101 User Manual
Product Overview


 Set up your DHM-401T gateway. (Please refer to the DHM-401T user manual for more information.)
 Plug the DHM-101 into an available USB port on the back of the DHM-401T gateway.

 Press the pairing button on the back of the DHM-401T gateway until you hear a beep and the Online Status LED
ashes green. You now have 60 seconds to pair sensors to the gateway.
 Press the pairing button on your Z-Wave device.
 When you have successfully paired your device, the DHM-401T gateway will beep 2 times.

 Press the unpairing button on the DHM-101 Z-Wave USB Dongle until you hear a beep and the Online Status LED
ashes green. You now have 60 seconds to unpair sensors from the gateway.
 Press the program button on your Z-Wave device.
 When you have successfully unpaired your device, the DHM-401T gateway will beep 2 times.