User manual

5D-Link GO-RTW-N300 User Manual
Section 1 - Product Overview
Hardware Overview
Front/Side
1 Power LED This indicates the current power status of the GO-RTW-N300, as detailed in the table below.
2 Internet LED This indicates the current Internet link status of the GO-RTW-N300, as detailed in the table below.
3 Mode Selector Switch Slide this switch to select between Router Mode and Access Point Mode
4 WPS Button Press this to activate Wi-Fi Protected Setup(WPS) to connect other wireless devices automatically.
5 Reset Button Pressing the Reset button for 6 seconds restores the router to its original factory default settings.
LED Indicator Color Status Description
Power Blue
Solid The device is powered on and operating properly
Blinking The device is connecting to a device through WPS
Light o The device is powered o
Internet Blue
Solid The device is successfully connected to the Internet
Light o The Internet connection is not established
5
3
4
1
2