User manual

69D-Link GO-RTW-N300 User Manual
Section 3 - Connecting a Wireless Client
Connecting a Wireless Client
WPS Button
Step 2 - Within 2 minutes, press the WPS button on your wireless
client (or launch the software utility and start the WPS
process).
The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Many wireless
devices will have a WPS button (or a software utility with WPS) that you can press to connect to the GO-RTW-N300 router. Please
refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS on it.
Step 1 - Press the WPS button on the GO-RTW-N300 for about 1
second. The WPS button will start to blink.
Step 3 - Allow up to 1 minute for the devices to congure your
connection. Once the WPS light stops blinking, you
will be connected and your wireless connection will be
secure with WPA2.