User manual
54D-Link GO-RTW-N300 User Manual
Section 2 - Setting Up With a Web Browser - Access Point Mode
Wireless Basics
Wireless
Enable SSID broadcast if you want the router to transmit its
SSID publicly so other wireless devices can discover it.
Enable wireless isolation to prevent connected wireless
devices from connecting to other wireless devices that are
also connected to the router.
Enter the SSID name you want to use for the wireless
network.
Use the dropdown menu to specify the wireless mode.
Use the dropdown menu to select the wireless channel.
Use the dropdown menu to select the channel bandwidth.
If you selected the 802.11n, 802.11 b/g, or 802.11 b/g/n
wireless modes, the available options are 20 MHz and 20/40
MHz. For the others, 20 MHz is the only option.
Select a wireless security encryption option. You can also
choose to not use one by selecting None, but this is not
recommended.
Enable SSID
Broadcast:
This page allows you to congure the wireless LAN settings. You can also congure the wireless encryption and wireless network
parameters.
Enable Wireless
Isolation:
Name (SSID):
Mode:
Channel:
Band Width:
Security
Options: