User manual

52D-Link GO-RTW-N300 User Manual
Section 2 - Setting Up With a Web Browser - Access Point Mode
This section will show you how to congure your new D-Link wireless router using the web-based conguration utility.
To access the conguration utility, open a web-browser such
as Internet Explorer and enter the IP address of the router
(192.168.0.50).
Enter admin in the User Name eld. Leave the password blank as
the default password.
If you get a Page Cannot be Displayed error, please refer to the
Troubleshooting section for assistance.
This section describes the conguration interface for Access Point
Mode. Make sure that the mode selector switch is in the AP
position on your GO-RTW-N300.
Manual Conguration
Access Point Mode
AP