User manual
42D-Link GO-RTW-N300 User Manual
Section 2 - Setting Up With a Web Browser - Router Mode
The Virtual Server page allows you to open a single port.
Select an application from the drop-down menu or
type a name in the next eld.
Enter a service name.
Select TCP or UDP from the Protocol drop-down menu.
Enter the WAN port number.
Enter the LAN Open port number.
Enter the IP address of the computer on your local
network that you want to allow the incoming service to.
Usual Service
Name:
User-dened
Service Name:
Protocol:
WAN Port:
LAN Open Port:
LAN IP Address:
Click the Apply Changes button to save any changes made. The
virtual server will then be added to the Current Virtual Server
Forwarding Table below. To delete or disable a virtual server, click
the Delete or Disable buttons in the Action eld of the virtual
server in the table.