User manual
26D-Link GO-RTW-N300 User Manual
Section 2 - Setting Up With a Web Browser - Router Mode
If you choose PPPoE, please congure the following elds:
When you have nished conguring the WAN settings, click the
Apply Changes button.
Select PPPoE from the drop-down menu.
Enter the user name provided to you by your ISP.
Enter the password provided to you by your ISP.
Enter the service name if your ISP provided you with one,
otherwise leave this eld empty.
Enter the Maximum Transmission Unit size. The default value
is 1492.
If your ISP or network administrator requires you to have a
static IP address for your connection, enter it here.
Select Continuous, Connect on Demand, or Manual as
the connection type from the drop-down menu. If you
select Manual, the connect and disconnect buttons will be
available.
Click this if the DNS is to be obtained automatically.
Click this to specify a DNS server. You can enter up to two
DNS servers.
Select the MAC address to be used for the connection.
Select Default MAC to use the router’s MAC address. Select
MAC from PC to copy your PC’s MAC address, or select
MAC Manual to manually enter a MAC address in the eld
provided.
WAN Access
Type:
User Name:
Password:
Service Name:
MTU Size:
Static IP
Address:
Connection
Type:
Attain DNS
Automatically:
Set DNS
Manually:
MAC Clone: