User manual
12D-Link GO-RTW-N300 User Manual
Section 2 - Setting Up With a Web Browser
4. Open a web browser. In Router Mode, rst time users will
automatically be directed to the setup wizard. For more details
about this wizard, refer to page 13.
If the setup wizard does not appear, or the GO-RTW-N300 is in
Access Point Mode, enter the IP address of the device in Router
Mode (default http://192.168.0.1) or Access Point Mode
(default http://192.168.0.50) in the address bar.
5. If you have set up the GO-RTW-N300 before, you will see a login
screen. Type “admin” as your user name, and enter the password for
the GO-RTW-N300. By default, the password should be left blank.
The conguration interface will open, and you can congure
the dierent settings of the GO-RTW-N300.
For detailed information on conguring your device, refer to the
following sections of the manual:
• “Router Mode” on page 13.
• “Access Point Mode” on page 52.
Router Mode
Access Point Mode