User manual

11D-Link GO-RTW-N300 User Manual
Section 2 - Setting Up With a Web Browser
Setting Up With a Web Browser
1. Move the switch on the top of the GO-RTW-N300 to the
desired mode, then plug it into a wall outlet near your cable/
DSL modem or router. Verify that the power LED is lit before
continuing.
2. Connect one end of your existing Ethernet cable into the Ethernet
port of your cable/DSL modem or router and then plug the other
end of the cable into the Internet port of the GO-RTW-N300. Verify
that the Internet LED is lit before continuing.
3. Plug one end of the included Ethernet cable into the
GO-RTW-N300 LAN port. Plug the other end of the cable into
your laptop’s Ethernet port.
Internet
Router
Internet
RT
Outlet