User`s manual

WELL PL-200 nano

Case 4: Join Multiple Devices to a Network

To add several new devices to an existing network, the process in Case 2 must be repeated for

each ‘joiner’. A vendor may implement a mode of operation in which an ‘adder’ device in the

network remains in the adder state for an extended period allowing additional ‘joiners’ to be

added in turn. This lets you press the ‘adder’ RESET/NET.ID button once then press each ‘joiner’

RESET/NET.ID button in turn.

If RESET/NET.ID buttons are pressed on two or more joiners, only the first one will respond. The

second will not. This makes timing important.