User`s manual

22
WELL PL-200 nano
Chapter 4 – Reset and Network ID Setting
4.1 Reset function
Push RESET/NET.ID button can reset to the factory default settings. Be careful, when you press
the RESET/NET.ID button, please remove the Ethernet cable (RJ-45cable) first, and then press
the RESET/NET.ID button. After press the RESET/NET.ID button for 10-15 seconds and then
wait for the PWR LED light again.
4.2 Network ID function
The HomePlug AV powerline communication devices can form multiple logical networks over a
common powerline or coax medium. There are many situations when it is desirable to add new
devices to, or remove old devices from, a HomePlug AV logical network.
Push RESET/NET.ID button to accomplish using HomePlug AV Simple Connect Technology.
Network ID function trigger state conditions
“Adder state” for a device providing the NMK for an existing AVLN
“Joiner state” for a device that will join an AVLN
Pushing buttons on any two devices results in one of them becoming an “adder” and the other
one a “joiner”