User`s manual

WELL PL-200 nano

3.4 Advanced

This view contains the advanced options. All operations are with respect to selected local

devices only. A combobox displays the local devices. Following are operations supported:

1. Upgrade firmware: To upgrade the firmware in a device click the upgrade button. Use the

browse buttons to select the firmware and PIB files.

NOTE: The utility only supports upgrading of the local device. Remote device upgrades are

not supported. Also if the device is in “Bootloader” mode (i.e) it has MAC address as

00:b0:00:00:00:01 then the firmware cannot be upgraded.

2. Reset Device.

3. Reset to factory defaults.

4. Set VLAN Tag

5. Set TOS bits.