User`s manual

WELL PL-200 nano

3.3 Device Setup

All the device setup related options can be found in this view. A combobox displays the local

Devices

If the Network Name has been pre-configured on a local device to a value other than HomePlug

or HomePlugAV (e.g. the push button pairing function on AV devices), the PPU will show the

name as “Unknown Networkname”. Although a pre-configured Network Name can not be

displayed, the hidden Network Name will be used to add new devices to the local network.

1. Set Local Device: This button will set the network name with the value in the text box in the

local device.

2. Set Remote Device(s): This button will set the network name with the value in the text box in

the local device as well the connected remote devices.

3. Use Default: This button will reset the value of the network name to “HomePlugAV”

4. “Set” – Multicast: This button will update the multicast filter addresses present in the local

device configuration. PPU throws a message "This device does not support this update

multicast settings option." Firmware versions less than v4.4 in INT/AR6400 devices and less

than v5.2 in INT/AR7400 devices does not support this feature. Please note that firmware

v4.5 in (INT/AR6400) does not support this feature