Operation Manual

GO-DSL-N151 User Manual
54
The following table describes the parameters of this page:
Field
Description
Current Settings Save the current settings and then reboot the router.
Factory Default
Settings
Reset to the factory default settings and then reboot
the router.
3.7.5 Diagnostics
Choose Maintenance > Diagnositics, the page shown in the following figure
appears. The page shows the test results for the connectivity of the physical layer
and protocol layer for both LAN and WAN sides.
The following table describes the parameters of this page:
Field
Description
Virtual Circuit Choose a PVC from the drop down list to test.