Operation Manual

GO-DSL-N151 User Manual

information between network devices.

The following table describes the parameters and buttons of this page:

Field Description

Get Community

Select to set the password for incoming Get requests

from the management station.

Set Community

Select to set the password for incoming Set requests

from the management station.

3.6.4 UPnP

Choose Access Management > UPnP, the page shown in the following figure

appears. This page is used to configure the upnp parameters.

UPnP (Universal Plug and Play) is a distributed, open networking standard that

uses TCP/IP for simple peer-to-peer network connectivity between devices. An

UPnP device can dynamically join a network, obtain an IP address, convey its

capabilities and learn about other devices on the network. In turn, a device can

leave a network smoothly and automatically when it is no longer in use. UPnP

broadcasts are only allowed on the LAN.