Operation Manual

GO-DSL-N151 User Manual
37
Field Description
QoS, you may set the upload bandwidth of the WAN
interface.
Rule Index You may establish at most sixteen QoS rules.
Active
You may select Activated or Deactivated. The QoS rule
can be set if it is activated.
Application
Support application options such as IGMP, SIP, H.323,
MGCP, SNMP, DNS, DHCP, RIP, RSTP, RTCP and RTP.
Physical
Ports
Choose the LAN Interface.
Destination
MAC
The Destination MAC address of the rule. If data packets
include the MAC address, the data packets are placed into
the group.
IP
The destination IP address of the rule. If data packets
include the IP address, the data packets are placed into
the group.
Port Range Port Range is from 0 to 65535.
Source
MAC
The Source MAC address of the rule. If data packets
include the MAC address, the data packets are placed into
the group.
IP
The source IP address of the rule. If data packets include
the IP address, the data packets are placed into the group.
Protocol ID You can choose TCP/UDP, TCP, UDP, ICMP or IGMP.
Vlan ID
Range
Select this option to Activated/Deactivated the 4094 VID
on the 4 different queues. VID (VLAN ID) is the
identification of the VLAN, which is basically used by the
standard 802.1Q. It has 12 bits and allows the
identification of 4096 (2^12) VLANs. Of the 4096 possible
VIDs, a VID of 0 is used to identify priority frames and
value 4095 (FFF) is reserved, so the maximum possible
VLAN configurations are 4,094.
IPP/DS
Field
Can set IPP/TOS or DSCP.
IP
Precedence
When IPP/TOS is set, select the IP Precedence ranging
from 0 to 7.