Operation Manual

GO-DSL-N151 User Manual

The following table describes the parameters of this page:

Field Description

Rule Index

The Virtual server rule index for this VC. You can

specify 10 rules in maximum. All the VCs with single IP

will use the same Virtual Server rules.

Rule Type

There are four types of One-to-One, Many-to-One,

Many-to-Many Overload and Many-to-Many

No-overload.

Local Start/ End IP

Enter the local IP Address you plan to mapped to. Local

Start IP is the starting local IP address and Local End

IP is the ending local IP address. If the rule is for all

local IPs, then the Start IP is 0.0.0.0 and the End IP is

255.255.255.255.

Public Start/ End IP

Enter the public IP Address you want to do NAT. Public

Start IP is the starting public IP address and Public End

IP is the ending public IP address. If you have a

dynamic IP, enter 0.0.0.0 as the Public Start IP.