Operation Manual

GO-DSL-N151 User Manual
34
Field Description
Rule Index
The Virtual server rule index for this VC. You can
specify 10 rules in maximum. All the VCs with single IP
will use the same Virtual Server rules.
Application Select an application type for this VC.
Protocol Select a protocl type for this VC
Start/End Port
Number
Enter the specific Start and End Port numbers you want
to forward. If it is one port only, you can enter the End
port number the same as Start port number. For
example, if you want to set the FTP Virtual server, you
can set both the start and end port number as 21.
Local IP
Address
Enter the IP Address for the Virtual Server in LAN side.
Rule
The Virtual server rule index for this VC. You can
specify 10 rules in maximum. All the VCs with single IP
will use the same Virtual Server rules.
In the NAT page, select the number of IPs as Multiple and choose IP Address
Mapping (for Multiple IP Service), and the page shown in the following figure
appears.