Operation Manual

GO-DSL-N151 User Manual

Field Description

connect to your network at the Wi-Fi hotspot,

create and pay for an account, and access the

Internet.

WPS state Support Configured mode.

WPS mode You can set PIN code or PBC.

Start WPS Click to start WPS progress

WPS progress This field indicates current WPS progress status.

Reset to OOB

Click Reset to OOB (out of box) to reset all Wi-Fi

setting to default.

SSID

The service set identification (SSID) is a unique

name to identify the router in the wireless LAN.

You may modify the SSID.

Authentication Type

You can set a type from Disabled, WEP-64Bits,

WEP-128Bits, WPA-PSK, WPA2-PSK,

WPA-PSKWPA2-PSK.

Active

Activate or deactivate Wireless MAC Address

Filter.

Action

You can set Allow Association or Deny

Association to make Wireless LAN station(s)

association. This function can be used to allow or

deny access to certain wireless clients based on

their MAC Address.

Mac Address #1~8 You can set eight Mac Addresses at most.

3.5 Advanced Setup

In the navigation bar, click Advanced Setup. In the Advanced Setup page that

is displayed contains Firewall, Routing, N AT, QoS, VLAN and ADSL.