Operation Manual

GO-DSL-N151 User Manual
21
Field Description
which is provided by your ISP.
Gateway
You can enter the gate way ip for dial-up,
which is provided by your ISP.
NAT
Select it to enable
Network Address
Translation (NAT) function. If you do not
select it but want to access the Internet
normally, you must add a route on the uplink
equipment. Otherwise, the access to the
Internet fails. Normally, it is enabled.
Dynamic Route You can select RIP1, RIP2-B or RIP2-M.
Direction
You can select None, Both, IN Only or OUT
Only.
Multicast
You can choose Disabled, IGMP v1 or IGMP
v2.
Select PPPoA/PPPoE in the ISP encapsulation if your ISP requires you to use a
PPPoE connection. This option is typically used for DSL services. Select
Dynamic PPPoE to obtain an IP address automatically for your PPPoE
connection. Select Static PPPoE to use a static IP address for your PPPoE
connection. Please enter the information accordingly.