Operation Manual

GO-DSL-N151 User Manual
18
If your ISP provides you an IP address automatically, you may select Dynamic IP
in the ISP encapsulation. Dynamic IP is typically used for Cable services. Please
enter the Dynamic IP information accordingly.
The following table describes the parameters of this page:
Field Description
Encapsulation
You can choose 1483 Bridged IP LLC, 1483
Bridged IP VC-Mux, 1483 Routed IP LLC
(IPoA) or 1483 Routed IP VC-Mux.
Bridge Interface You can choose Activated or Deactivated.
NAT
Select it to enable Network Address Translation
(NAT) function. If you do not select it but want to
access the Internet normally, you must add a
route on the uplink equipment. Otherwise, the